Tag: Driveway Melbourne

How to Install An Asphalt Driveway?

 

The driveway to your home is incredibly important – How to install an asphalt driveway? not only does it serve the practical purpose of giving you a point access and exit for your property, but it is the crucial first impression that your home presents to the world.

Whether it is visitors arriving for the first time, or if it is just the experience that you get as you turn your car in through your front gate, your driveway should not only be safe and secure but it should also look good and complement your entire property.

One of the most popular surfaces used for driveways in Australia is asphalt.

Preparation Steps

Once you’ve decided to install an asphalt driveway for your home there are a number of important steps to take.

If you are getting a contractor in to install the asphalt, it is essential that you clarify with them as part of the contract what preparation is included and anything that you may need to do yourself.

If you have an existing driveway, the surface of this may need to removed or repaired – this is generally referred to as base-work preparation to create a compacted, stable, and even surface.

Other things to consider during the preparation is any line-marking, or grading required or any alterations or adjustments that might required for drainage on your property. Know more about asphalt: https://en.wikipedia.org/wiki/Asphalt.

The installation

The process of installing asphalt is not necessarily a complicated one, but it does require some heavy, specialised equipment that you are unlikely to have on hand.

Once the base-work has been completed, the first step is to create a layer of crushed rock to create the required buffer for drainage.  Once the rock is packed into your driveway space, this is then allowed to rest for approximately one week. The asphalt is then applied to the surface and compacted with a heavy roller.

You then need to form the edges of the driveway.

Drainage is an important consideration for your property and the construction of your new driveway.  If your driveway is completely flat, it is advisable to build a gradient so that water runs off and doesn’t pool on the driveway.  It is worth considering applying a sealant to the asphalt to help protect the surface while it is weathering.

Think about the type of traffic that will be using your driveway – if you are expecting heavy vehicles or larger trucks then you may need a thicker layer of asphalt to prevent any damage.

The advantages of asphalt

The decision on what type of surface to instal for your driveway may be influenced by a range of factors, but asphalt has a lot of benefits – there is no need for joints in the surface, it is durable, discourages ants and weeds, and can be easily resurfaced without having to remove the old surface.

Conclusion

An asphalt driveway can be created simply and with relatively low cost.  Ensure that you have used reputable contractors who have installed the driveway with care and proper attention to all the necessary considerations.  Make your driveway an impressive entrance to your home.

 


Asphalt Driveway Maintenance Tips

 

Is your curb becoming a bit of an eyesore? Perhaps you would consider changing it, or plan for an asphalt driveway maintenance. This type of driveway enables you to make your garden path seem so much prettier as well as actually adding on some value to your house. That has to be good news, right? It is if you can keep it well maintained. Nothing looks worse than a poorly kept asphalt driveway. But do not fear home improver, we have the suggestion for you to have the best driveway in town.

  • Sealing:

Once you put down your concrete, it will requiring sealing. If you do not seal the concrete, you will find that its surface degrades rapidly and the quality of the path will decrease. Not only should you apply the sealant after first laying the path down, you should arrange for it to be replaced at least every two years.

  • Cleanliness:

It may seem a little strange but asphalt driveway maintenance is prone to staining from a wide variety of substances. This includes oil, gas and general dirt. You may be keen to jump out and scrub your dirty driveway with a good old scrubbing brush. Yes that quite often gets the stain off but it can also totally ruin the quality of your concrete surface if you use a wire brush. Once you have done your scrubbing, take a power hose to it to get rid of any stubborn stains and to rinse off the soap.

  • Ice and Snow:

If it is a winter wonderland, this is bad for your driveway even though it is fun for the kids. Should your asphalt driveway become covered in snow, you should make it a priority to remove it as soon as possible. The freezing and thawing of ice and snow can actually cause your concrete surface to split and cracks to appear. This totally ruins the path. But we must warn you now, do not attempt to use any de-icing chemicals because these can seep into the concrete and destroy it. What we recommend is for you to use sand instead. If you spread this over the concrete in cold weather and have it re-sealed in the spring, you are guaranteed to have a long lasting path.

  • Weight:

This may seems little strange but make sure that you do not have too much weight on your asphalt driveway. Yes it can hold your car, even one as bulky as an SUV but if you happen to drive anything heavier than that, try and keep it off your path to avoid it cracking under the weight and all of a sudden, the entire thing is ruined.

So all of you proud owners of concrete surfaces, take heed our our advice for a asphalt driveway maintenance. Follow it and you will have a cracking asphalt driveway to enjoy: https://www.practiceroadsafety.ca/tag/driveway-design/.